Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Centers for Coastal Ocean Science (NCCOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch 201111 1st raster digital data Silver Spring, MD NOAA's National Ocean Service (NOS), National Centers for Coastal Ocean Science (NCCOS) http://ccma.nos.noaa.gov/products/biogeography/usvi_nps/data/ This dataset contains a CARIS BAG with 4x4 meter cell size representing the bathymetry of a sharply sloping swath of the St. John Shelf, a selected portion of seafloor south of St. John, USVI, derived from data collected from 3/28/2011 to 4/14/2011. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired multibeam bathymetry data south of St. Thomas and St. John, USVI, from 3/28/11 to 4/14/2011. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz) for water depths greater than 75 meters. It was processed by a NOAA contractor using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM zone 20 north, datum NAD83. The processed CARIS data was used to generate a CARIS BASE surface based on CUBE. A BAG file was exported from the BASE surface, and converted to a GeoTIFF in ESRI ArcMap 10.The project was conducted to meet IHO Order 1 and 2 accuracy standards, dependant on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards. This multibeam data was collected as IOCM (Integrated Ocean and Coastal Mapping) project NF-11-01 during the seventh year of an ongoing NOAA scientific research mission in the US Caribbean to characterize nearshore to deep water coral reef habitats at depths down to 1,000 meters. The mission purpose is to better understand the resources within the surveyed reef habitats, and ultimately develop species utilization models linking physical habitats with biological information. The multibeam backscatter, multibeam bathymetry, and ground truth video footage collected during the 2004-2011 missions will be used internally to characterize sea floor topography and to create benthic habitat maps, helping NOAA meet its mapping commitment to the US Coral Reef Task Force. The resulting publicly-distributed data is also a contribution to the greater scientific community interested in the USVI seafloor. 20110328 20110414 ground condition Complete As needed -64.690574 -64.650851 18.236350 18.210564 NOS Data Explorer Topic Category Bathymetry/Topography CoRIS Discovery Thesaurus Geographic Information > Bathymetry CoRIS Theme Thesaurus EARTH SCIENCE > Oceans > Bathymetry/Seafloor Topography > Bathymetry EARTH SCIENCE > Biosphere > Aquatic Habitat > Reef Habitat > Description None USVI US Virgin Islands Bathymetry Grid Multibeam Raster NOAA Biogeography Nancy Foster Kongsberg EM 1002 GIS Habitat MBES Benthic Sonar NPS Reef IOCM Integrated Ocean and Coastal Mapping Coral Seafloor ISO 19115 Topic Category elevation 006 environment 007 geoscientificInformation 008 imageryBaseMapsEarthCover 010 oceans 014 None USVI US Virgin Islands St. John CoRIS Place Thesaurus OCEAN BASIN > Atlantic Ocean > Caribbean Sea > Virgin Islands > Virgin Islands > St. John (18N064W0011) COUNTRY/TERRITORY > United States of America > U. S. Virgin Islands > St. John > St. John (18N064W0011) CoRIS Region USVI None Seafloor None 2011 Please cite any use of this data. Note: NOT TO BE USED FOR NAVIGATION. These data were prepared by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed in this report, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. Any views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. Although all data have been used by NOAA, no warranty, expressed or implied, is made by NOAA as to the accuracy of the data and/or related materials. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by NOAA in the use of these data or related materials. Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Centers for Coastal Ocean Science (NCCOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch Project Manager - Seafloor Characterization of US Caribbean mailing and physical address

1305 East West Highway, SSMC4

Silver Spring MD 20910 USA (301) 713-3028 (301) 713-4384 Contact info is for CCMA general reception. Please ask for current Biogeography project manager for Seafloor Characterization of US Caribbean. Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Centers for Coastal Ocean Science (NCCOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.x While the project was conducted to meet IHO Order 1 and 2 accuracy standards, dependant on project area and depth, all users should independently analyze the dataset according to their own needs and standards to determine data usability. This GeoTIFF is sourced from a CARIS gridded dataset. The original full-resolution multibeam data was used to create a downsampled uniform-resolution CARIS BASE (Bathymetry Associated with Statistical Error) surface grid with a best depth component. The downsampled grid nodes from that depth surface were then exported and used to generate the ESRI Grid. Some positional shifts may have occurred between the original data points and the transformed grid. See Data Acquisition and Processing Report (DAPR) for NF-11-01. See Data Acquisition and Processing Report (DAPR) for NF-11-01. Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch Unpublished material vector digital data external hard drive 201103 201104 ground condition Raw Multibeam Data NF-11-01 Original raw full resolution dataset. Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Centers for Coastal Ocean Science (NCCOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch Unpublished material vector digital data external hard drive 20110328 20110414 ground condition NF-11-01 HDCS Processed Multibeam Data Processed, cleaned, and corrected full resolution dataset. Sourced from raw .HSX (Hypack) and .ALL (SIMROD) data. Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch Unpublished material raster digital data external hard drive 20110328 20110414 ground condition NF-11-01 BASE Surface Downsampled CARIS BASE (Bathymetry Associated with Statistical Error) grid with best depth layer. Sourced from processed HDCS data. Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch 201111 tabular digital data http://ccma.nos.noaa.gov/products/biogeography/usvi_nps/overview.html external hard drive 20110328 20110414 ground condition NF-11-01 ASCII XYZ Multibeam Data Downsampled ASCII text file containing XYZ values. XYZ = northing, easting, and depth in meters. Sourced from CARIS BASE surface. For this project, the Chief Scientist was NOAA/NOS/NCCOS/CCMA's Tim Battista and the Lead Hydrographer was independent contractor Mike Stecher. Data was collected aboard the NOAA ship Nancy Foster from 3/28/2011 to 4/14/2011, as project number NF-11-01. Multibeam data was acquired in Simrad .hsx and .7k formats with hull-mounted Reson 7125 and Kongsberg Simrad EM 1002 multibeam echosounders (400 kHz). Simrad backscatter snippet collection was enabled. Line spacing for acquisition was three times the water depth, and data was retained out to 60 degrees from nadir, depending on project area. Heave, roll, pitch and heading correctors were collected using an Applanix POS/MV Model 320 inertial measurement unit (IMU) and associated Trimble GPS antennas. Sound velocity profiles were acquired with a Seabird Electronics SeaCat SBE19P CTD profiler and processed using Seabird Seaterm software. Positioning was obtained using Northstar 941X GPS receivers with differential correctors from U.S. Coast Guard CORS beacon Isabel, Puerto Rico. Data was reduced to Mean Lower-Low Water (MLLW) using final approved tides from NOAA COOPS, based on National Water Level Observation Network (NWLON) primary tide stations at Charlotte Amalie, VI (9751639) and Lime Tree Bay, VI (9751401). Raw Multibeam Data NF-11-01 2011 Raw .hsx and .all data were converted and processed using CARIS HIPS v7.0 software, resulting in a CARIS HDCS format dataset with all correctors applied. Attitude and SWMB data was cleaned of fliers, and SWMB data was reviewed in subset mode by a NOAA contractor. NF-11-01 HDCS Processed Multibeam Data 2011 After being submitted to CCMA by the contractor, CARIS HIPS v7.0 was used to generate a CARIS BASE surface (similar to a DTM), based on CUBE (Combined Uncertainty and Bathymetry Estimator) from the processed HDCS data. Then CARIS export tool "BASE Surface to ASCII" was used to export a comma delimited ASCII XYZ file, with Easting, Northing, and Depth values, using ground position units (NAD83 UTM zone 20N). A .BAG file (Bathymetric Attributed Grid) was also exported from CARIS using the "BASE Surface to BAG" tool. NF-11-01 BASE Surface 2011 The BAG file was opened in ArcMap 10 and exported as a GeoTIFF. NF-11-01 BASE Surface 2011 Raster Grid Cell 704 1044 1 Universal Transverse Mercator 20 0.999600 -63.000000 0.000000 500000.000000 0.000000 Row and Column 4.000000 4.000000 meters North American Datum of 1983 Geodetic Reference System 80 6378137.000000 298.257222 Mean lower low water 0.0000001 meters Explicit Depth Coordinate Included with Horizontal Coordinates Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Centers for Coastal Ocean Science (NCCOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch Project Manager - Seafloor Characterization of US Caribbean mailing and physical address

1305 East West Highway, SSMC4

Silver Spring MD 20910 USA (301) 713-3028 (301) 713-4384 Contact info is for CCMA general reception. Please ask for current Biogeography project manager for Seafloor Characterization of US Caribbean. Downloadable Data These data were prepared by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed in this report, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. Any views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. Although all data have been used by NOAA, no warranty, expressed or implied, is made by NOAA as to the accuracy of the data and/or related materials. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by NOAA in the use of these data or related materials. CARIS BAG file http://coastalscience.noaa.gov/datasets/ccma/biogeo/usvi_nps/2011/bathymetry/stj_shelf_bag_4m_11.zip None 20121231 20121212 NOAA/NOS/NCCOS/CCMA Biogeography Branch Project Manager for Seafloor Characterization of US Caribbean mailing and physical address

1305 East West Highway, SSMC4

Silver Spring MD 20910 USA (301) 713-3028 FGDC Content Standards for Digital Geospatial Metadata FGDC-STD-001-1998 Local Time http://www.esri.com/metadata/esriprof80.html ESRI Metadata Profile 20121212062745 None 20110328 20110414 http://www.coris.noaa.gov/metadata/records/html/nf11w00216_1002_bag4m_metadata.html 6587